2.1.3
Disregarding safety regulations
DANGER
Disregarding safety regulations
Disregarding safety regulations can result in damage to property, severe or
fatal injuries.
• Always comply with the safety regulations
Liability
Güdel shall not be held liable under any of the following circumstances:
• The installation regulations were disregarded
• Included protective equipment was not installed
• Included protective equipment was modified
• Included monitoring equipment was not installed
• Included monitoring equipment was modified
• The product was not used as intended
• The maintenance work was not performed in the specified intervals, or
was carried out incorrectly.
2.1.4
Installation instructions
Protective mea-
sures
The operating company is responsible for ensuring safe conditions in the vicin-
ity of the product. In particular, he must ensure compliance with the general
safety regulations, guidelines and standards. Before commissioning the system
the operating company must check whether all the protective measures have
been implemented. These must cover all hazards. This is the only way to en-
sure that application of the product conforms to CE regulations.
As stipulated by the Machinery Directive, the protective measures must:
• Correspond to best practices
• Comply with the required safety category
Modifications
The product must never be modified or used in a manner contrary to its in-
tended use.
General rules for
occupational
safety
The generally accepted occupational safety rules must be observed and imple-
mented.
Safety
OPERATING MANUAL Automatic lubrication system
FlexxPump 402 / 402B
90071992656444683_v9.0_
EN-US
22
