2.2
Position of the encoder
A
Fig. 2-2
Position of the encoder
A
Encoder
2.3
Function
Lubrication is an important part of the maintenance.
The following are the most important elements for achieving effective lubrica-
tion to optimize productivity:
• Lubricant dispenser
• Lubrication point
• Lubrication quantity
• Lubrication cycle
MEMOLUB is a powerful (25 bar) and precise electro-mechanical lubricant
dispenser. The lubrication is centralized and automated. The lubricant is con-
tained in a cartridge. With the progressive distributor, several points can be
lubricated simultaneously.
2.3.1
Control
For regular lubricant dispensing, the lubricant dispenser needs to be con-
trolled by a PLC. To this end, a pulse rhythm needs to be sent for every lubri-
cation cycle, by means of a control signal. Güdel recommends the following
program sequence
Design, function
SERVICE MANUAL Automatic lubrication system Memolub
PLCD (24 V DC)
9007199348992139_v2.0_
EN-US
10
