2.3.2.1
All outputs open
The progressive distributor evenly distributes the incoming lubricant to all
outputs. The opposite outputs are operated by the same piston. For the iden-
tical conveying volume to be output at the opposite outputs, the headless set
screw must close the connecting passage of the two outputs. The progressive
distributor is normally supplied ex works with the headless set screw fitted.
1
3
4
5
6
2
0.2cm
3
0.2cm
3
Output
Output
Piston
The same conveying volumes are output by the piston at output 1 and
output 2. The connecting passage between the two outlets is closed
with the headless set screw.
Headless set
screw
Connecting passage
Fig. 2-7
All outputs open (the internals of the progressive distributor are shown in simplified form)
Design, function
SERVICE MANUAL Automatic lubrication system Memolub
PLCD (24 V DC)
9007199348992139_v2.0_
EN-US
14
