7
Malfunctions / Troubleshooting
DANGER
Hazardous voltage
The product contains components that are energized with hazardous volt-
ages. Touching these components will cause an electric shock. Electric shocks
can be fatal!
Before working in the danger area:
• Switch off the superordinate main power supply
• Secure the superordinate power supply against being switched on again
(main switch of complete system)
• Ground the equipment.
WARNING
Automatic startup
During work on the product, there is danger of the machine starting up auto-
matically. This can lead to severe or fatal injuries!
Before working in the danger area:
• Secure vertical axes (if equipped) against falling.
• Switch off the superordinate main power supply. Secure it against being
switched on again (main switch for the complete system)
• Before switching on the system again, make sure that no one is in the dan-
ger area
WARNING
Overpressure
The automatic lubrication system is pressurized during operation. If mainte-
nance and repairs are performed without depressurizing the system, people
can be severely injured!
• Wear protective goggles
• Depressurize the system before performing the work
Malfunctions / Troubleshooting
SERVICE MANUAL Automatic lubrication system
Memolub PLCD (24 V DC)
9007199348992139_v2.0_
EN-US
27
