730372.doc 3429
6
Operation
To move the spotlight, press one of the directional switches firmly. By pressing a horizontal switch
and a vertical switch together, the light will move both vertically and horizontally at the same time.
Pressing the Green center switch once will activate the 100 watt spotlight beam. Pressing the
same switch 2 or 4 times will turn off all lights. Pressing the same switch 3 times will activate the 55
watt floodlight beam. This applies on initial start up or if power has been disconnected.
Precautions
DO NOT
look directly into the spotlight or floodlight while it is operating.
DO NOT
cover the light with a fabric cover or any other flammable material. Accidental activation
may result in a fire hazard.
DO
turn the spotlight toward the control station when not in use. If the spotlight is accidentally
activated during daylight, the operator will be more likely to notice and turn the spotlight off before
draining a battery.
Maintenance
Under normal conditions, mild detergent and water will be sufficient to keep the spotlight clean.
Avoid using caustic chemicals or abrasives as they may damage the housing. No lubrication is
necessary.
Green LED:
Any Control Switch Activated
LEFT
RIGHT
UP
DOWN
This Red LED:
Spot Light Is ON
This Red LED:
Flood Light Is ON
Light ON/OFF Switch
Also For Switching Between
SPOT & FLOOD Lights
