R
MODEL 2612A
10 AMP PORTABLE BATTERY CHARGER
OWNER’S MANUAL
Connections at a glance:
The Guest ChargePro Model 2612A is designed to be used as an on board charger
for lead acid batteries (flooded cell or AGM types) and gel cell batteries. We
recommend that you set up the charger near the battery you wish to charge, and
make connections in the following order:
1. Charger POS (red wire with fuse) to battery “ + “.
2. Charger NEG (black wire) to battery “ – “.
3. Plug AC line cord into a GFCI protected wall socket.
4. Remove connections in the reverse order.
SAVE THESE INSTRUCTIONS
+
-
12V BATTERY
2612A
