User Manual
Introduction to Buttons
BUTTON FUNCTION
On/ Off
Power on/off
M
To enter menus and its sub menus
To select one sub menu or option under menu
To confirm parameter setup
To toggle between four spots or four areas under spot or area analysis
Λ
Button
Up-direction
To toggle between sub menus under menu
To turn on or turn off laser locator when there is no menu on live image
v Button
Down-direction
To toggle between sub menus under menu
To 2× zoom in the live thermal image
<
Button Left-direction
To return to the parent menu
To change value of parameters
To switch between infrared image and visual image when there is no
menu on live image
>
Button Right-direction
To enter sub menus under menu
To change value of parameters
To perform background calibration when pressed simultaneously with
“C”
Ok
To select one sub menu or option under menu
To freeze and store live image when menu does not appear on screen.
To record voice annotation, replay voice annotation after recording and
bring up the recording menu when re-recording
To replay a selected image after preview
To switch between infrared image and visual image when replaying the
stored images
C
To cancel one sub menu or option under menu
To exit menu
To perform non- uniformity calibration when there is no menu on live
image
To perform background calibration when pressed simultaneously with
“>”
●
When menu does not appear on screen, keep it depressed for three
seconds to switch between Auto and Manual mode for either live
thermal image or visual image
When menu does not appear on screen, press it for an instant and then
release it to bring up the temperature measurement setup menu
