User Manual
•
Tamb
: Show the ambient temperature automatically measured by the camera.
Note:
Altering Tamb value is unavailable.
•
Press Button “Menu” or “OK” to confirm the change and exit the “Target Setup”
menu.
•
Press Button “C” to exit the “Target Setup” menu.
•
Press Button “C” again to return to the live image
Sub Menu Time
•
Press Button “Menu” or “
＞
” to enter the option “Setup”. Press Button “ ” to
∨
highlight “Time”
•
Press Button “Menu” or “OK” to enter the “Time Setup” option
•
The setup parameters menu will then appear. Press “ ”and“ ”
∧
∨
to move between
each setting, press Button “
＜
”and “
＞
” to alter the values
•
Press Button “Menu” or “OK” to confirm the change and exit the “Target Setup”
menu.
•
Press Button “C” to exit the “Target Setup” menu.
•
Press Button “C” again to return to the live image
Note:
•
Time refreshes in real time when the camera is working. Resetting the
parameters under the menu above interrupts refreshing. After setup, time
goes on to refresh on time.
•
Resetting time is essential when it takes more than half an hour to replace
the battery
