User Manual
Sub Menu Default
•
Camera setup parameters remain the same after re-powering on the camera. But
they can be resumed to be the factory configured ones.
•
Press Button “Menu” or “
＞
” to enter the option “Setup”. Press Button “ ” to
∨
highlight “Default”
•
Press Button “Menu” or “OK”. Then a NUC is performed automatically.
•
After NUC, all the parameters become the factory configured ones.
Menu Analysis
•
Press Button “Menu” to bring up the main menu. Press Button “ ”and“ ” to
∧
∨
highlight the menu “Analysis”
•
Four sub menus Spot, Line, Area and Isotherm are available
Sub Menu Spot
•
Spot analysis is merely available on frozen / saved images.
•
Press Button “Menu” or “
＞
” to enter the option “Analysis”. Press Button “ ” to
∨
highlight “Spot”, select by pressing Button “Menu” or Button “OK”
•
Five spots are shown on the screen, among which four are marked as A, B, C,
