User Manual
72
•
To save the ultimate coordinates of the pen after adjustment, select button Save. To test
the adjustment result, select button Test, draw anything with the touch pen on the screen
and observe whether the cursor moves accordingly with the pen. If so, adjustment has
done well. Now select button Save to save the ultimate coordinates of the pen after
adjustment. Then the pen and cursor will respond each other accurately.
•
Select button Exit or press button C to exit the interface and return to the live thermal
image.
Note:
In the adjustment process, improper adjustment may cause the touch pen not to
work well. Thus it is strongly recommended to use joystick and buttons in this process.
Menu Help
•
Click the icon Guide at the right top corner of the screen with the touch pen to bring up the
main menu and then click the submenu Help. Or press the joystick to bring up the main
menu and move the joystick up or down to select the submenu Help.
