User Manual
74
•
Under the case that no progress bar is displayed in the screen, keep button Power
depressed for 5 seconds. Then the camera will switch off.
Video Output
•
The camera offers 3 modes of video output: VGA, PAL and NTSC. VGA always existing
after powering on the camera (video on the LCD screen and OLED viewfinder is VGA).
PAL and NTSC are available upon setup.
VGA output:
•
When the camera and the VGA display device to be used are powered off, properly
connect them with the VGA cable.
•
Power on the camera and the VGA display device.
•
Set sub-option VideoOut in option System under submenu Parameters to be Off, save the
setup and return to live image.
•
Now you can view the live VGA video on LCD screen, OLED viewfinder and the VGA
display device.
VGA &PAL output or VGA & NTSC output:
•
When the camera and the TV video display device to be used are powered off, properly
connect them with the RS232/ TV video cable.
•
Power on the camera and the TV video display device.
•
Set sub-option VideoOut in option System under submenu Parameters to be PAL or NTSC,
save the setup and return to live image.
•
Adjust the TV video display device to receive PAL or NTSC video as per the above setup.
•
Now you can view live VGA video on LCD screen & OLED viewfinder and live PAL or
NTSC video on the TV video display device simultaneously.
Note:
•
It is also feasible to connect the camera to a VGA display device and a TV video display
device simultaneously, through the corresponding VGA cable and RS232/ TV video cable.