The clutch is automatically depressed when the engine is turned
on, in order to move the vehicle insert the first gear and
accelerate, the clutch engagement is proportional to this action
e.g. a slow/fast start depends entirely on the amount of pressure
which is applied on the accelerator.
At speeds below 20 km/h the clutch is automatically depressed
whenever the accelerator is fully released, above 20km/h
whenever you need to change gear simply place your hand
over the gear stick sensors to depress the clutch
smoothly and automatically, vice versa
removing your hand releases the
clutch compatible to the
actual speed of the vehicle.
During deceleration ,
caused also by sudden
braking,
the
original
braking features of the
vehicle remain unaltered as the
clutch is depressed at a speed
below 25km/h , if acceleration is
again requested the reintegration of
the clutch is proportional to the
amount of pressure applied on the
accelerator pedal regardless to the gear
inserted.
Whenever conventional driving is required e.g. using the original
pedals , the Synchro Drive Clutch can be switched off using the
red button on the command console fig 1.
OPERATING THE DEVICE
A
A
