USAGE, MAINTENANCE INSTRUCTIONS AND
WARNINGS
USAGE:
Starting the vehicle:
Activate the device by pressing the Red
button on the command console, make sure that the transmission
is in neutral before starting the engine.
Departing:
starting the engine automatically depresses the clutch
, insert the gear and push down gradually on the accelerator.
Braking:
the vehicle will stop below 20km/h regardless of the gear
inserted without causing the engine to shutdown.
Switching off the vehicle:
turn off the ignition and ensure that
the transmission is in neutral.
WARNINGS:
In order to avoid the unnecessary
engagement of the clutch whilst
driving be careful not to obscure or
cover the sensors “
A
” incorporated
into the gear knob.
In the event of any malfunctioning or
blockage of the device (green or
yellow lights flashing) enter the
neutral gear position and press the
“
B
” button , this will reset the
device.
MAINTENANCE:
Maintenance must be carried out at an authorised service center.
The first service should be done after 10,000 km and then after
every 20,000km. The motor brushes should be controlled every
20,000 km and if necessary replaced.
B
A
