15
take place only manually by the aid of push buttons situated beside
the display unit. The upper push button serves to toggle between
the
measured values („the screens“):
The lower push button serves to toggle between the currently measured
values and the Min/Max values:
The device can also be set up to toggle the „screens“ automatically,
in for about 5 sec interval. The cycle can be interrupted by pressing a key.
If you do not want to use the keypad, you can disable it in the device settings.
Display warnings:
Displayed when no SIM card is inserted
Displayed if the card requires you to enter
the PUK code. This condition may occur e.g.
if a PIN is activated on the SIM, but PIN code
stored in the device configuration is not valid.
The SIM card requires a PIN code but the PIN
is not set/enabled in the SW configuration
(Default).
Summary of Contents for AR003954
