16
Menu Options
The menu can be entered by pressing a combination of both keys. In any
case, using the keypad must be enabled in the device configuration.
Individual menu items, too, may be disabled in the device setup. It is e. g.
possible to switch on the device in this way, but it is not possible to switch it
off.
To enter the menu:
Press the lower key and hold it pressed for about 3 s, until bottom menu line
appeared. Then release this key immediately and shortly press the upper key
during the following 4 s.:
You can now work with individual menu items. Press the upper key to scroll
through the menu items, press the lower key to confirm (SET). After
confirming certain choices, the menu will be quit automatically. If the keypad
is inactive for more than 20 s, the menu will close automatically.
Menu items:
Deactivation of the optical (LED diode) and/or acoustic
(the intermittent tone) alarm signalling. The option "Mute optical
and/or acoustic signalling are controlled from local keypad " must
be enabled in the device configuration. If you deactivate (mute)
the signalling (optical and/or acoustic) using the device keypad,
the signalling is automatically reactivated when another alarm
occurs. See
Deleting the Min/Max values in the device and it is related only to
values obtained since last reset. This does not concern those
recorded Min/Max values obtained in some other way. Option
must be enabled in the SW device configuration.
Switching the device off. This item is available only if the device
is ON. Option must be enabled in the SW device configuration.
Device switching-on. This item is available only if the device
is OFF. Option must be enabled in the SW device configuration.
Closing the menu.
Summary of Contents for AR003954
