46
Parameters of datalogger inputs
AR006087
________________________________________
Measured value:
Internal temperature
Temperature range:
(-
20 to +60) °C
Accuracy:
± 0.4 °C
(*)
(*)
During battery charging temporary measurement
accuracy deterioration may be found.
Response time:
T63 < 6 min, t90 < 15 min (temperature jump 20 °C,
air circulation ca 1 m/s)
Display resolution:
0.1 °C
Recommended calibration interval:
2 years
AR005892
________________________________________
Measured values:
2 x temperature sensed by an external
Guilcor
Pt1000/E series probe
Temperature range:
(-20
0 to +260) °C, Pt1000/3850 ppm sensor
Measuring current: ca 0.5 mA with pulses of ca 60 ms
length
Input accuracy (without probes):
±0.2 °C in a range of
-20
0 to +100 °C
±0.2 %
of the measurement value in a range of +100
to +260 °C
The accuracy of the device with a temperature probe
connected to it is determined by the above input
accuracy and the accuracy of the probe employed.
Connection mode:
Two-wire
connection
with
the
possibility
of
compensation of the error caused by the cable
resistance. The probe is provided with a 3-pin M8 ELKA
3008V connector. Its connection mode is shown in
Annex 2.
Summary of Contents for AR003954
