Customer Helpline
0333 3201989
9
Operating Instructions
2. SWITCHING THE GLUE GUN ON (SEE FIG. D1, D2, D3)
1) Hold the on/off switch down for roughly 3 seconds to start the glue gun.
Note:
A LED light will illuminate when switched on.
2) The first indicator light will glow red to indicate the glue gun is on.
3) The second indicator light will then glow green after 10 seconds indicating the glue gun is
ready to use.
Note:
Allow the glue gun to heat up before you start operating. The glue gun will turn off
automatically after 5 minutes without any operations.
WARNING!
The glue gun nozzle and heated glue gun become hot while in use. In the
event of accidental skin contact with hot glue, run under cold water immediately.
3. SWITCHING THE GLUE GUN OFF (SEE FIG. D4)
Press the on/off switch to switch off. All LED lights will turn off.
CAUTION!
The protective nozzle will remain hot for a few minutes. Do not store the glue gun
directly after use. Allow the nozzle to cool and the glue to solidify.
D1
D3
D2
D4
