Guilin Feiyu Electronic Technology Co., Ltd
Guilin Feiyu Electronic Technology Co., Ltd http://www.feiyudz.cn E-mail: service@feiyu-tech.com
Page 4
After configuration is "OK" ,please save the parameters to the Data Radio, otherwise the
parameters will back to before after power off. Click on the "Write(W)", the software will save the
parameters to the data radio, please re-detected again and read the current parameters, if the parameters
is the setting parameters, then the parameters have fully configured and saved into the data radio
success:
FY-605 Data Radio configuration instructions
FY-605 use independent power supply work mode, 2 pin interface for power supply(5v power
supply, do not connect high voltage), and 3 pin interface for the data port (the interface power cable not
connected, so USB-TTL data cable don't need to pull out the red power cord) :
