Guldmann 28355, User Manual

3

© 

Guldmann 10/2022 # 9006

30_101

© 

Guldmann 10/2022 # 9006

30_101

GB/US AUXILIARY STRAPS

Vers. 101.0

Item no:

28355 Auxiliary Straps

1 .00  Purpose and use

1 .01 Manufacturer

V. Guldmann A/S

Graham Bells Vej 21-23A

DK-8200 Aarhus N

Tel. 

+ 45 8741 3100

www.guldmann.com

1 .02  Intended purpose

Auxiliary Straps are used to pull the user back in a wheelchair 

when other methods are not possible.

2 .00 Maintenance

2 .01 Cleaning

  Normal washing at the indicated temperature

  Do not use bleaching agent

  Tumble-drying at low temperature

  Do not iron

2 .02  The owner’s daily maintenance duty

Check the

 accessory

 for wear and damage before use accord-

ing to the following checklist which is not intended to represent all 

potential inspection steps. Potential damage may vary. Judgment 

of inspector/site prevails.

Accessory inspection checklist

Before using Guldmann accessory check the following:

Is the accessory clean?

Follow facility specific infection control procedure.

Is the accessory’s label present, legible and complete?

Missing, illegible or incomplete 

accessory

 label(s) could make 

identification of appropriate size of the 

accessory

, function of 

accessory

, and or weight limit capacity of the 

accessory

 impos-

sible.

Are the straps and stitches intact?

•  Look for broken or worn stitches

•  Look for knots in straps

•  Look for tears or fraying of straps

•  Look for snags or punctures or holes

•  Look for any particles in fabric or straps

Is the fabric intact?

•  Look for abnormal wear patterns, excessive wear, abrasive 

evidence

•  Look for cuts or frayed fabric

• 

Look for unusual or significant discoloration

•  Look for snags, punctures, tears, holes

•  Look for frayed or insecure seams

•  Look for any acid / caustic / thermal burns

•  Look for changes in material consistency, e.g. increased  

stiffness

•  Look for any imbedded particles

Has the shape of the accessory been altered, made shorter 

or longer in relation to the original size using knots, needles, 

tape or other methods?

Conclusion

If the

 accessory

 suffers from one or more of the above mentioned 

conditions then it must be taken out of service.

3.00  Technical specifications

Lifting capacity, SWL  . . . . . . . . . . . . . . . . . . . . . . . 255 kg (560 lbs) 

Material  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Polyester