background image

© Guldmann GB/US-941/01/18 • # 944122

© Guldmann GB/US-941/01/18 • # 944122

10

Safety nosing list

If anyone or anything gets caught under the platform when it is lowered,  

the descent will stop as soon as the safety nosing list is activated.

This safety function can be deactivated by pressing the »

é

« button and  

removing the person/object which activated the safety nosing list.

Overload protection

The design of the platform provides the platform a protection against overload 

both during lifting and lowering. This means that the platform will always raise 

a little when the down button is activated. In case of overload the platform will 

not raise or lower.

2 .04 Accessories

Battery Backup

Guldmann recommends a battery backup if the area is subject to losses of 

power.

The battery backup ensures that the lifting platform can work even if the  

supply voltage fails. In the event of a power failure, the battery backup will 

provide the supply voltage, and all functions will be active/serviceable as  

long as there is power in the batteries.

Important!

It is important that an indicator lamp is fitted, and that this is always visible 

when the lifting platform is fitted with a battery backup. This lamp should 

show whether the line voltage is switched on.

External operating panel

Extra operating panels with »

é

« »

« buttons, for assembly on walls and the

like. Available with a lock.

Wireless operation

This can be used in cases where there are one or more independent users.

It gives the users the opportunity of controlling the lifting platform, such that 

they are not dependent on a helper.

Important!

When the user is independent, the remote control should be attached to the 

user in a suitable manner, such that it is always within the reach of the user.

Summary of Contents for Stepless LP1

















Reviews: