© Guldmann GB/US-941/01/18 • # 944122
© Guldmann GB/US-941/01/18 • # 944122
4
1 .03 Important/Warnings
• All the operating instructions must be read before using the product.
• LP1 must be assembled by the Guldmann Service Team, or by an engineer
authorised by Guldmann.
• LP1 is controlled by a microprocessor pc board, which can be damaged by
static electricity if touched without the necessary precautions. Thus, the elec-
tronics should be looked after by quaified technicians, only.
• The accompanying “safety chain” must be used when the service engineer
moves around underneath the lifting platform.
• MAX. load 180 kg must not be exceeded.
• The lifting platform and access ramp must be swept clear of gravel, fallen lea-
ves, snow, etc., before use.
• The lifting platform is designed for passenger transport, and must be used in
accordance with the instructions given in this manual.
•
The lifting platform must not be used during fire.
•
Safety equipment must only be reset by qualified assistance.
• Playing with or around the lifting platform is not allowed.
• A simple and serviceable »Emergency Procedure« must be described and
agreed between the user and the helper. This is to ensure that the user does
not get trapped on the platform in the event of electrical or mechanical failure.
1 .04
Unpacking and Preparation
Visual Check
If the packaging is damaged on receipt, the parts of the lifting platform should
be inspected carefully for visible deficiencies, defects or faults. If damage is
suspected, the lifting platform must not be used before qualified service per
-
sonnel or the Guldmann Service Team have authorised it.
Contents
1. Lifting platform and safety curtain
2. Access ramp
3. Railing/safety edge
4. Power supply
5. Hand switch
6. Manual
