© Guldmann GB/US-941/01/18 • # 944122
© Guldmann GB/US-941/01/18 • # 944122
8
2 .00
Description of Functions
2 .01 Labels
max 180 kg / 400 lbs
Part no.
13015-xxx
Serial no. xxxxxxxxxx
230V, 0.5A
Internally powered
equipment 24V DC
V. Guldmann A/S
Graham Bells Vej 21-23A
DK-8200 Aarhus N
Made in Denmark
yyyy-mm-dd
Lifting Platform LP1
Overload label placed at the overload
indicator on the safety edge of the lifting platform.
2 .02
Operation – electric
The lifting platform is operated by means of a hand control with a spiral
cord, allowing each user freedom of position.
The operation and use of the lifting platform is logical and unproblematic,
even without prior knowledge of the platform.
Raising the lifting platform from the lower level
1. When the lifting platform is at the lower level, and
the access ramp is lowered down onto the level,
the wheelchair user can drive into/up onto the lif-
ting platform without hindrance.
2. Activate the hand control by pressing »1«, and the
access ramp will be raised, thereby acting as the
drive-off lock.
3. When the access ramp is right up, and »1« conti-
nues to be depressed, the platform will be raised.
4. Once the lifting platform is at the correct level it stops automatically, and
the user can drive off.
If the lifting platform is overloaded, the indicator lamp on the safety edge of
the lifting platform will be on and the lifting platform will not lift or lower. After
the overload has been removed, the lifting platform will can operate again.
Lowering the lifting platform from the upper level
1. The wheelchair user drives into the lifting platform.
2. Activate the hand control by pressing »2« and the lifting platform will
descend. Button »2« will remain active as long as it is depressed.
3. Once the lifting platform has reached the lower level the access ramp will be
lowered, and the user can drive off the lifting platform.
MAX
