© Guldmann GB/US-941/01/18 • # 944122
© Guldmann GB/US-941/01/18 • # 944122
9
2 .03
Safety Functions
Important!
Individual and specific consideration should be given to how an emergency
summoning system should work. One or more persons should be appointed
to be responsible for helping with the correct use of the lifting platform.
The person(s) responsible should always be able to be summoned in the event
of an emergency and the users should be informed of who is responsible.
It is recommended that users who are particularly dependent on the lifting
platform purchase a battery backup – see under accessories.
Description of emergency stop
The emergency stop must only be used in the event of an emergency. If it
should be necessary to use the emergency stop because of a malfunction,
the distributor must be contacted before the lifting platform is used again.
The emergency stop is located in the centre of the safety edge. It stops all
movement when activated.
The emergency stop should be turned out, and by pressing on the hand con-
trol button the LP1 restarts.
Description of emergency lowering – access ramp
The access ramp is fitted with a bolt in the actuator. Unscrew this bolt and the
access ramp will open up. See point 1.06.
Important!
When the bolt has been removed from the access ramp, the access ramp
will no longer be attached – Hold the access ramp firmly when removing the
bolts.
Safety curtain
Ensures that no one can get in underneath the lifting platform, when it is at
the upper level and thereby risk getting caught when the lifting platform is
lowered. The safety curtain is mounted from the factory.
Mounting of safety curtain
1. One piece of the velcro of the safety curtain is mounted on the upper and
lower plate of the lifting platform from factory.
2. Place a broomstick or similar through the scissors construction across the
platform.
3. Put the safety curtain over the upper plate and leave it on the broomstick with
no contact to the platform.
4. Press the velcro on top of the safety curtain firmly together with the velcro
placed underneath the upper plate, starting with the corners opposite to the
access ramp end.
5. Press the velcro on top of of the safety curtain firmly together with the velcro
placed underneath the upper plate at the corners of the access ramp end.
6. Remove the broomstick.
7. Press the velcro at the bottom of the safety curtain firmly together with the
velcro on the lower plate of the platform.
