Gently pull out the jet cover in the arrow direction to remove
then carefully remove the suction control screen, the jet inner cover
Align and snap the jet inner cover, the suction control
screen on the jet cover. Then snap on the jet cover in th
arrow direction to the housing to close
Cleanjet-SL
(Refer to CleanJet-SL Assembly for more details)
Cleanjet Cover Removal and Installation
7
INSTALLATIONS
Align fingers to the open, turn counter-clockwise
and pull in the arrow direction to remove jet cover
Align jet cover on the jet housing then turn clockwise
to install jet cover
1
2
2
1
The Open
Cleanjet
Cleanjet Liner (Optional)
Align the liner on top of the bowl to cover, the jet cover on
the liner should snap on the jet housing located on the bowl.
Plug the drain stopper onto the drain hole on the liner, this
should also plug the drain hole on the glass bowl
Remove the liner from the glass bowl and discard after use
Glass Bowl
Jet Motor & Housing
Drain
Liner
