3
This appliance is for use on a nominal 120-volt circuit, and has a grounded plug that looks like the plug illustrated in
sketch A. This product is to be connected to a branch circuit outlet protected by a Class A GROUND FAULT CIRCUIT
INTERRUPTER (GFCI), and the GFCI shall be tested regularly for continued protection and correction
operation. If a Class A GFCI protected outlet is not available, DO NOT USE THIS PRODUCT! Please
contact a licensed electrician for installation of a Class A GFCI according to local electrical codes, or equivalent.
•
THIS PRODUCT IS FOR INDOOR USE ONLY
•
DISCONNECT POWER SUPPLY CORD BEFORE SERVICING AND CLEANING
GROUNDING INSTRUCTIONS
•
Plug the machine into a 120 V grounded outlet.
•
Turn the switch to the “on” position and place the customers hand over the top of the opening to draw in the nail dust.
OPERATING INSTRUCTIONS
• The Nail Dust Collector should be stored indoors.
• Before storing your Nail Dust Collector, it should be cleaned. For cleaning instructions, refer to
User Maintenance (Cleaning) Instructions.
• Wrap the power supply cord to keep it untangled when not in use.
STORAGE INSTRUCTIONS
• Replace the filter, lift off the protective screen and remove the filter.
• Always use a clean filter to improve longevity of your to machine.
• Clean the outside of the machine with a clean, damp cloth to remove any dust or residue.
USER-MAINTENANCE (CLEANING) INSTRUCTIONS
Warning
Turn off unit and disconnect power supply cord before cleaning.
