7
INSTALLATIONS
Anchor
Jet Cover and Impeller
Cleanjet Max Installation
Snap the jet cover and impeller onto the anchors located on the plate
in the direction of arrow as shown. Make sure the jet snapped securely
on the plate.
To remove, simply pull the jet cover and impeller from the anchors
t s
Foo
re t
I s de
n i
Liner
Tub Wall
Opening
Handle
Jet
Lock
Cleanjet Max SL Installation
Place the poly liner and drain plug firmly onto the tub, hold the handle and push into the opening located under the footrest in the direction
of the arrow until it is secured. Make certain that the jet is snapped firmly on the tub wall and the handle is secured to the opening.
To remove, simply pull out the handle with jet cover and impeller from the opening
Pull out the lock as shown to remove cover and impeller from the handle
