5
.............................
CCEC/ OM Manual GlasStile GSS 1.6 EN
07
.2009
Section 1
Introduction
Introduction
General
Please read this manual carefully, it contains information that will assist you with all aspects of
installation and maintenance, including unpacking. Correct installation & Maintenance will ensure
smooth functionality and increase the lifespan of components.
Gunnebo Entrance Control Ltd makes every effort to ensure that this manual is reviewed whenever
significant changes are made to the design. However, our policy of continuous improvement may
result in some small differences between the unit supplied and the description in this document.
Enquiries in this respect should, in the first instance, be directed to our Technical Department.
Tel44 (0) 1825 746105, Fax +44 (0) 1825 763835, or alternatively E-mail
turnsupport.entrancecontrol@gunnebo.com
Electrical Warnings
The electrical power used in this equipment is at a voltage high enough to endanger life. Before
carrying out maintenance or repair, you must ensure that the equipment is isolated from the electrical
supply and tests made to verify that the isolation is complete.
When the supply cannot be disconnected, functional testing, maintenance and repair of the electrical
units is to be undertaken only by persons fully aware of the danger involved and who have taken
adequate precautions and training.
Mechanical Warnings
Safety systems and controls, such as interlocks, covers and guards, must not be overridden or by
passed by personnel other than authorised staff who are qualified to carry out prescribed actions
within specified Warnings.
Only trained individuals should work on the unit as it has many moving parts and there is a possibility
of serious injury
Errors
Reports on errors, comments and suggestions concerning this manual are requested and encouraged.
They should be submitted to:
Technical Department, Gunnebo Entrance Control Ltd, Bellbrook Business Park, Uckfield, East
Sussex, TN22 1QQ, UK.
Tel44 (0)1825 746105, Fax +44 (0)1825 763835 or alternatively E-mail
turnsupport.entrancecontrol@gunnebo.com
Proprietary Notices
All data appearing herein is of a proprietary nature, with exclusive title to it held by Gunnebo. The
possession of this Manual and the use of the information are therefore restricted only to those persons
duly authorised by Gunnebo.
Do not reproduce, transcribe, store in a retrieval system or translate into any human or computer
language, any part of this Manual without prior permission of Gunnebo.
Hardware Changes
No hardware changes may be made without authority from Gunnebo who will be responsible for
ensuring that the proposed change is acceptable in all safety aspects. Personnel authorised by
Gunnebo may only make hardware changes.
