6
Specifications:
Part Number:
77159
Electrical input:
230-240V AC / 50HZ / 0.3A
Motor
rating:
25W
Tumbler bowl opening diameter:
7.5" (192mm)
Tumbler bowl depth:
4 5/8" (117.5mm)
Maximum Capacity (including media):
5lbs (2.27kg)
Media available:
For cleaning and rust removal:
• Brown Resin Media, Medium Grade:
Part number 77160, 1kg bag.
For polishing (dry shining):
• Ceramic Media, Medium Grade:
Part number 77161, 1kg bag.
7
Precautions:
• Read these instructions and fully understand them before attempting to use the
tool.
• Before each use, inspect the general condition of the tool; check for loose
items, misalignment or binding or moving parts. Check for any condition that
may affect its safe operation.
• Do not operate the tumbler with the cover off, as hazardous dust may be
generated, and the media may be ejected from the tumbler.
• Do not place any items on the cover while the tumbler is switched on.
• Caution: too little media in the tumbler bowl could damage the parts being
tumbled.
• Only use media recommended for vibratory machines; media suitable for
standard rotating tumblers is not suitable for vibratory machines.
• Always make sure that the parts are not too big for the bowl, as they can
damage it over time.
• When the tumbler is switched on, never cover up the machine to dampen the
noise as this could cause overheating, creating a fire risk.
• If the tumbler has been running for a number of hours, do not remove the cover
immediately after switching off. Allow any dust to settle by waiting for at least 30
minutes.
• Media can be re-used; if deburring use a magnet to remove any small steel
parts from the media before storing the media in a clean, dry container.
• Do not use the equipment for a purpose for which it was not designed.