12
CARBON FILTER-not supplied
Activated carbon filter can be used to trap odors. Normally the activated carbon filter
should be changed at three or six months according to your cooking habit. The
installation procedure of activated carbon filter is as below.
1.
Remove the grease filter(s).
2.
Hook the carbon filter over the pins that are located at the end of the motor.
3.
Turn the carbon filter anticlockwise, until you feel it click into place.
※
Repeat this process for the second carbon filter. You need to place a carbon filter at
either end of the motor.
※
Refit the motor access panel and fully tighten the screws that you removed
previously.
※Refit the lower and upper chim ney sections to the m ain body of the hood.
NOTE:
•
Make sure the filter is securely locked. Otherwise, it would loosen and cause
dangerous.
•
When activated carbon filter attached, the suction power will be lowered.
