6
Drill a hole in the cupboard according to the size in pic 2.Make sure the distance
between the edge of the hole and the edge of the cupboard edge is at least 17mm.
Installation method 1:
1. Fix the left and right hanging boards with 4pcs ST4*8 screws on the cooker hood
body.See pic 3.
2. After ensuring the position and height of cooker hood ,fix two ST40*30mm screws
in the cabinet against the side of the wall. Make sure that the left and right hanging
board can hang on the screw in the wall.See pic 4.
3. Refer to the picture 5,remove the filter firstly.Press out the lights and dismantle the
wrie of the lights. Then use the screwdriver to unscrew two screws on the panel
and take out off the panel.