7
4. Put the cavity into the cabinet and hang on the screws of the wall.See pic 6.
5. Fasten the cavity from the bottom of the cabinet with 10 pcs ST4*14mm
screws.See pic 7.
6. Refer to the picture 8,put the expansion pipe on the outlet,and lead it to outside.
7. According to the reverse order of step 3, install the panel, the light, and the filter
are back into the cooker hood body sequentially.
Installation method 2:
1. Refer from step 1 to step 4 in the installation method 1, put the cavity into the
cabinet.
2. See pic 9,
Use 8 pcs ST4*14screws to secure the cavity to the cabinet from the
inside of the cavity.Ensure that the bottom of the cavity is tightly attached to the
bottom of the cabinet.
3. Follow the step 6 of installation method 1,
put the expansion pipe on the outlet,and
lead it to outside.
4. According to the reverse order of step 3 of installation method 1 , install the panel,
lights, and filter are back into the cavity sequentially.