11
When the display is flashing, press “
”for 3 seconds to start up the oven. Then oven in
use symbol“
”lights up and decimal point symbol “
” twinkles. When decimal point
symbol “
” twinkles, press “
”or “
” to set the system time. After choosing the time ,
lift the finger off the buttons and wait for 5 seconds, then decimal point symbol “
” stop
twinkling. It means time is well set. Like pic 8.Whenever user wants to set the time again, In
the status of pic 7, push “
” one time, when user sees decimal point symbol “
”
twinkles, then can set the time again.
Pic 6 Clock setting state diagram Pic 7 Feature to be selected state diagram
(second icon flickering)
(second icon always bright)
Press button“
” again for 3 seconds, oven is turned off and returns to standby status.
The display of pic 6 is flashing.
Pic 8 System time well set diagram
Note 1
：
System time setting range is 0
：
00-23
：
59.
Note 2
：
When setting the time for each function of the timer, you can set the time by short
press or long press “
” and “
”,short press will add 1 minute or reduce 1 minute each
press of the button, while long press will quickly increase or decrease the time by 1 minute,
so it can set the time fast.
Alarm clock setting function
In the state of function to be selected, when the display shows the system time, oven in use
symbol“
” and decimal point symbol “
” keep bright, press “
” two times, then the
clock icon“
”twinkles, and the screen display changes to the alarm clock time(First set
default display “0
·
00”), alarm clock time and decimal point symbol “
” always display , like
pic 9.When the alarm clock icon“
” twinkles, Press“
”or“
” to set the clock. Alarm
clock well set diagram like pic 10 (Set 10 minutes).
