parts.
You must do as following:
-only use the appliance to cook food and nothing else;
-check the soundness of the appliance after it has been unpacked.
-disconnect the appliance from the electrical mains if it is not functioning
properly and before cleaning or performing maintenance.
-when left unused, unplug the appliance from the electricity mains;
-use oven gloves to place cookware in the oven or when removing it.
-Always grip the oven door handle in the center as the extremities of the
same may be not due to any hot air leaks.
-make sure the knobs D and C are in the “●” position when the appliance
is not in use.
-after disconnecting it from the mains when you decide not to use the
appliance any longer.
-the manufacturer may not be held responsible for any damage due to:
incorrect installation, improper, incorrect and irrational use.
-If the power cord is damaged, it must be replaced by the manufacturer
or a qualified service engineer to avoid any risks to safety.
-The appliance is for indoor use only.
Installation
The appliance must be installed only by a qualified person in
compliance with the instructions provided.
The manufacturer declines
all responsibility for improper installation which may harm persons and
animals and damage property.
Important:
the power supply to the appliance must be cut off before any
adjustments or maintenance work is done on it.
Installation of built-in ovens
In order to ensure that the built-in appliance functions properly, the
cabinet containing it must be appropriate. The figure below gives the
dimensions of the cut-out for installation under the counter or in a wall
cabinet unit.
21
