Initial configuration of network settings
G&D ControlCenter-Digital-160 ·
17
English
Initial configuration of network settings
Accessing the
Config Panel
web application and using the expanded network functions
requires you to configure the network settings of the matrix switch.
You can configure the network settings by using one of the new consoles.
Configuring network ports
A matrix switch, which is integrated into the network, can only be addressed after
the network ports are configured.
How to configure the settings of a network port:
1. After the console is switched on, the matrix switch asks you to log in. Enter the
following data to the login box:
2. Press
Enter
to log in and open the on-screen display.
3. Press
F11
to call the
Configuration
menu.
4. Select
Network
and press
Enter
.
5. Select
Interfaces
and press
Enter
.
IMPORTANT:
In the default settings, the
Network A
port is assigned to the IP address
192.168.0.1
.
Username:
Enter a username.
Password:
Enter a password for your user account.
IMPORTANT:
Change the administrator account's default password.
The
default
access data is:
Username:
Admin
Password:
see
login
information on the label attached to the controller card
NOTE:
The default
admin
password for devices manufactured before October
2020 is
4658
.
