Configuration
G&D DP-Vision-IP ·
38
English
How to change the colour depth of the image data to be transmitted:
Freeze mode
If the cable connection between the computer module and the user module is inter-
rupted during operation, the KVM extender no longer displays an image at the remote
console.
Enable the
Freeze
mode if you want the last image that has been displayed at the user
module to be available until the connection is re-established.
To highlight an interrupted connection, the last available image can be displayed
with either a coloured frame and/or a
Frozen
popup and the time passed since the
connection has been interrupted.
OSD
1. Press
Ctrl+Num
(default) to open the on-screen display.
2. Select the row
Target setup
and press
Enter
.
3. Under
Color depth
press
F8
to select on of the following options:
24 Bit:
transmits the image data with a maximum colour depth
of 24 bits (
default
)
18 Bit:
reduces the colour depth of image data to 18 bits
4. Press
F2
to save your settings.
Confi
g
Pan
el
1. Click on
KVM Extenders > [All Extenders]
on the directory tree.
2. Double-click the computer module of the KVM extender you want to con-
figure.
3. Click on the tabs
General
.
4. Under
Color depth
select one of the following options:
24 Bit:
transmits the image data with a maximum colour depth
of 24 bits (
default
)
18 Bit:
reduces the colour depth of image data to 18 bits
5. Click
OK
to save your changes.
