background image

- 9 - 

 

Limited Warranty

 

 

1. GunVault (the “Company”) warrants to the original consumer (the “Purchaser’) 

that the SpeedVault safe will be free from defects in workmanship and materials 
for a period of one (1) year from the date of purchase.  These warranties are not 
assignable or transferable to any other person.  

2. Any damage to the SpeedVault safe as a result of misuse, tampering, abuse, 

neglect, accident, improper installation, modification, unauthorized service, 
destruction, or the alteration of the serial number, or use violation of the 
instructions furnished by the Company will void this warranty.  

3. The sole responsibility of the Company shall be limited to the repair or 

replacement (in its sole discretion) of any component of SpeedVault safe which 
fails to conform to this warranty at no cost to the purchaser for a period of one (1) 
year from the date of original purchase.  

4. Contact the Company directly to obtain service under this warranty.  If it becomes 

necessary to send a defective product to the Company, a Return Authorization 
Number must first be obtained from the company.  

5. Products shipped without prior Return Authorization and Return Authorization 

Number may not be accepted, and the Company will not be responsible for their 
disposition and/or cost of return to the owner.  

6. The Company will not assume any responsibility for any loss or damage incurred 

in shipping.  All return authorized products should include a copy of the original 
invoice in order that this warranty may be honored.  

7. This warranty is not an insurance policy.  The Company is not responsible for 

damage to or theft of the Purchaser’s SpeedVault safe or its contents.  

8. We recommend that the enclosed warranty card be completed in full, and 

returned to the Company within ten (10) days of the original date of purchase to 
validate this warranty.  

9. Any implied warranties which the purchaser may have are limited to the duration 

of the warranties described above.  There are no further warranties which 
extend or apply beyond the face hereof, and the company expressly disclaims 
and excludes any and all warranties of merchant ability or fitness for a particular 
purpose.  Some states do not allow limitations on how long an implied warranty 
lasts, so the above limitation may not apply to you.  

10. Repair or replacement shall be the sole remedy for the purchaser under this 

warranty.  The Company shall not be liable for any direct, indirect, incidental or 
consequential damages, losses or expense arising from the use or misuse of 
the SpeedVault safe.  Some states do not allow the exclusion or limitations of 
incidental or consequential damages, so the limitation may not apply to you.  

11. This warranty gives you specific legal rights, and you may also have other rights 

which vary from state to state.  

  
 
 

Summary of Contents for SpeedVault SV 500













Reviews: