background image

- 1 - 

 

Firearm Safety

 

 

WARNING:

    The  SpeedVault  safe  or  any  other  firearm  storage  device  cannot 

take the place of other safety procedures including advising children of the 
dangers of firearms.  

 
WARNING:

 The manufacturers and distributors of the SpeedVault safe do not 

recommend, suggest, advise, promote or otherwise condone the ownership 
or use of firearms.  We at GunVault Inc. believe the decision to own or use a 
firearm is a serious decision that should only be made by an adult who has 
carefully considered the risks and benefits of such a decision. 

 
WARNING

: The keypad  and push buttons on  the control  panel are electronic.  

They have a certain feel to them and may seem different to different people.  It 
is important for you to become accustomed through practice, as to how the 
SpeedVault safe responds to your own personal touch. 

 
WARNING:

  Never  mix  alcohol  or  drugs  with  firearms  or  the  SpeedVault  safe.  

Alcohol  and  other  substances  likely  to  impair  normal  mental  or  physical 
functions  should  not  be  used  before  shooting  or  handling  firearms  or  the 
SpeedVault safe.  

 
WARNING:

 Never grab your firearm by the trigger when removing or placing into 

the SpeedVault 

safe.  Make sure your firearm’s safety mechanism is on.  

 
WARNING:

 Always point your firearm in a safe direction.  Common sense should 

dictate which direction is the safest.  

 
WARNING:

  Always 

follow  the  firearm  safety  rules  set  out  by  the  firearm’s 

manufacturer.  

 
WARNING:

 Be familiar with how firearms work.  GunVault recommends that you 

obtain as much information as possible on firearm safety.  

 
WARNING:

  Always  handle  firearms  as  if  they  are  loaded  and  ready  to  fire.  

Always assume that a firearm is loaded. 

 
WARNING:

 In order to enjoy the maximum security benefits of the SpeedVault 

safe product, it must be mounted in place using the equipment provided with 
the product, according to the instructions provided herein.  Use of this product 
as  a  storage  receptacle  without  mounting  according  to  the  instructions 
provided herein, may compromise security of the SpeedVault.

  

 

Summary of Contents for SpeedVault SV 500













Reviews: