- 2 -
Getting Started
Set your keys to the side. Don’t lock them inside the safe!
●
Pull open the battery cover.
●
Pull out the battery holder.
●
Insert new 9v battery. Following the Positive (+) and Negative (-) guides on
the holder.
●
When power has been connected, the green light blinks one time and then
the red light blinks one time, with a long beep during the process.
●
Use the factory-default code to open the unit, which is: Press each button one
time, from left to right -- 1 , 2 , 3 , 4.
●
Getting ready to program
●
Find the LED light in the keypad.
●
It can glow either green or red. Depending upon the function being utilized.
●
There is an audible beep when keys are pressed.
