GunVault SVB 500, User Manual

- 8 - 

Installing the SpeedVault: 

IMPORTANT

: When mounting the SpeedVault Biometric make sure the drawer 

has enough space to drop open.  The drawer requires gravity to fully release, 
always install in a vertical position (see image below) 

1. 

Secure the “

Mounting

Bracket

” to the desired location using the “

Wall

Mounting

Holes

” on the bracket and the provided wood screws.   

IMPORTANT

: Mounting screws provided are for solid wood surface only.  If 

mounting to another surface type, drywall, cement, and etc, the appropriate 
hardware can purchased through a local hardware store. 
 

2. 

Remove the two “

Thumbscrews

” located on the bottom of the SpeedVault 

Biometric (see image below). 

3. 

After removing the two “

Thumbscrews

”, open the SpeedVault Biometric 

using the supplied keys.  This will allow the drawer to be removed by lifting it 
up and out.   

4.  With the drawer removed, the SpeedVault Biometric can now be mounted to 

the bracket.  Insert the “

Mounting

Hooks

” into the “

Hook

Mounting

Holes

” 

located on the left, right, or back of the SpeedVault.  Now that the SpeedVault 
Biometric is mounted to the bracket, it can be secured to the bracket by using 
the supplied “

Thumbscrews

”.