GUSKINER 1980'S Fogger Pro, User Manual

USER MANUAL- Termonebulizadora Guskiner 1980'S Fogger Pro

8. Pesticide application range and dose (for reference only)

     A. Application on forest and fruit trees (spray mist):

          1. Spray time: before sunrise and after sunset with no wind or breeze.

          2. Climate: air humidity between 30-80%, temperature below 35ºC (the lower the

               temperature, the higher the humidity, the better the spray effect).

          3. For crops shorter than 5 meters, the pesticide can be mixed with water to spray the mist.

               Generally with a pesticide / water ratio of 1: 5 to 1:10, the solution with an amount is

               equal to 150 kg of water to be filled to the 15-30 kg solution tank, can complete the work

               of spraying of an acre of land, whose length of spraying and diffusion can reach more than

              10 meters. (in case there are more pests in the field, more solutions will be used and more

               distances and areas).

     B. (Diesel fume spray) formulating methods on non-editable crops (The following method is only for

          reference, as the case may be). The spray and diffusion length can reach 50 meters, without

          windy or breezy.

          Mix order:

          1. First mix Diesel Diffusion Agent with Diseel and stir until smooth,

               then add water and pesticide. The mixture must be completely dissolved before use. In the

               mist spray, open the water valve to 1 / 3-2 / 3 position, change gear 1 and 2 from

               evenly to a small opening, using the spray is uniform and does not go off.

           Dosing method:

           1. Mix (diesel emulsifier or agricultural ornaosilicon) and diesel according to the ratio of 1:15 (the total

               amount of diesel corvers 10% -20% of oil tank capacity). The mist concentration will be regulated

               according to the water / diesel ratio. the pesiticide with an amount of 10% of the capacity of the

               oil tank will be mixed with water from 70% to 80% of the tank capacity, shake until

               get a uniform mixture and it is ready to use.

           2. With 12-15kg diesel, 5-6kg pesticide, 200-300ml organosilincone added to the tank, the rest

                it will fill with water. The amount of organosilicon to add depends on when the diesel, the

                pesticide and water.