EN
Page | 24
11.1
Installation
Install the accessories supplied before
using the mobile air conditioner.
•
First install the appliance connection
adapter and the window panel
adapter on the exhaust air hose
(Fig. 2).
•
Push the appliance connection
adapter into the fitting on the side
until it engages.
•
Connect the window panel adapter
to the window panel.
IMPORTANT
•
A kinked exhaust air hose will
detract from the performance of the
mobile air conditioner.
•
Do not kink the exhaust air hose.
•
Observe the following minimum and
maximum heights.
Incorrect connection
Correct connection
NOTE
The better the windows or openings are
sealed, the better the cooling effect of
the mobile air conditioner.
Ventilate the room in which the mobile
air conditioner is installed at regular
intervals.
IMPORTANT
Do not extend the exhaust air hose.
Do not reduce the diameter of the
exhaust air hose.
12
Before using
for the first time
Basic cleaning
Clean the mobile air conditioner and all
individual parts before using for the first
time as described in section "Cleaning"
to remove any packaging dust residues.
Allow the mobile air conditioner to stand
upright for 12 hours before using for the
first time.
In order to remove any production-
related residues, operate the mobile air
conditioner for 1 hour with the window
open.
If odours occur during operation of the
mobile air conditioner, this is normal
and disappears after a short time. It is
not a malfunction. Ventilate sufficiently.
