EN
20
OPERATING INSTRUCTIONS
Operation touch element
The functions of the ABIERTA hood are controlled via a touch control panel.
The control unit has 3 fan power levels and one intensive level, as well as a lighting
function.
ON / OFF
By touching the ON / OFF symbol the device becomes ready for operation.
The symbol is backlit. Fan speeds 1
-
2
-
3
-
Int. are available .
Touching it again switches the unit OFF .
1 2 3
Fan Power levels
By touching the respective power stage, it becomes active and starts up with a
slight time delay. Touching it again switches the power stage off.
The active power stage is backlit.
Int.
Intensive level
Touching the Int. icon activates the intensive level (maximum fan power). The
motor automatically switches back to the previously active level after approx. 5
minutes.
The active power stage is backlit.
Lighting
Touching the illumination symbol illuminates the hob with full intensity.
Touching it again switches the lighting off.
F
Grease filter cleaning
The grease filter display
(F)
(flashing 1) is activated after max. 15 operating
hours or at last after 14 days.
If the grease filter display
(F)
flashes, the metal grease filter must be cleaned. Af-
ter cleaning, replace the filter and deactivate the grease filter display by a reset.
The
ON/OFF
symbol must light up for this to happen
-
otherwise touch to get
ready for operation. Then touch
ON/OFF
symbol until it goes out (appr. 10 sec .).
+
-
Rocker switch (10) functions
(available after activation of the lighting)
+
button press and hold starts the dimming function .
When released, the achieved intensity reduction remains.
A brief touch returns to full intensity .
-
button pressing and holding the key changes
the light heat infinitely variable from
6500K to 2700K.
This setting is also used after after switching off.
