mega macs 56 Bike
2. Select
>Hardware<
.
3. Open the list under
Brightness
with
.
4. Select the requested brightness value.
The display brightness is adjusted immediately. The selection will be saved automatically.
6.6.1.2
Calibrating the Touch Screen
Proceed as follows to calibrate the touch screen:
1. Select
Miscellaneous
under
> Settings
in the main menu.
2. Select
>Hardware<
.
3. Configure the touch screen of the device with
.
4. Regard the info window.
Touch screen has been calibrated. The selection will be saved automatically.
6.6.1.3
Configuring the Energy Management
Here you can set whether the device shall switch off automatically if not used for some time.
Proceed as follows to set the energy management:
1. Select
Miscellaneous
under
> Settings
in the main menu.
2. Select
>Hardware<
.
3. Open a list under
Energy management (automatic switch-off)
with
.
4. Select
>on<
or
>off<
.
If
>off<
is selected, the device will remain in stand by mode until the battery is empty.
If
>on<
is selected, device will switch off automatically after 10 min.
The selection will be saved automatically.
6.6.2
Configuring the Car History
This menu provides the diagnostic results to the present vehicle from the functions
>Trouble codes<
,
>Parameters<
,
>Basic settings<
and
>Codings
. This has the following advantages:
•
You can evaluate the diagnostic results later.
•
Compare previously performed diagnostics to present diagnostic results.
•
You can show the customer the diagnostic results without needing to reconnect the vehicle.
6.6.2.1
Automatic Car History Transfer
NOTE
Only if
Automatic Car History transfer
is set to
>on<
, the data saved in the Car History will be
automatically transferred to Hella Gutmann.
Proceed as follows to transfer the Car History automatically:
1. Select
Miscellaneous
under
> Settings
in the main menu.
2. Select
>Car History<
.
3. Open a list under
Automatic Car History Transfer
with
.
38