mega macs 56 Bike
5 Initial Start-Up
This section gives a description of how to switch the device on and off as well as all the necessary steps for the first
use of the device.
5.1
Charging the Battery
Prior to putting the device into operation, charge the battery for at least 8 to 10 h while the device is switched off.
Proceed as follows to charge the battery:
1. Insert the voltage supply plug into the device's socket.
2. Insert the power plug into the plug socket.
The battery is being charged.
5.2
Switching on the Device
NOTE
When starting the device for the first time and after every software update, you need to confirm
the general terms and conditions (GTC) of the Hella Gutmann Solutions GmbH. Otherwise, certain
device functions will be unavailable.
If
mega macs 56 Bike recovery
("Rescue App") is displayed when switching on the device, please
contact the responsible support staff or the Hella Gutmann Technical Help Line.
Proceed as follows to switch on the device:
1. Briefly push the ON/OFF button.
The GTCs appear.
2. Read the GTCs and confirm them at the end of the text.
The user selection window is displayed. The respective user name is saved for all data stored in the Car History.
This enables quicker identification of the mechanic who performed the repair work if a query is subsequently
made.
3. Double-click
.
4. Enter the user name.
5. Confirm your entry with
.
6. Activate the
Stay logged in
check box if necessary.
If the
Stay logged in
check box is activated, you will not need to select a user name when switching on in the
future.
7. Confirm your entry with
.
The input will be saved automatically. The main menu appears.
Now you can start working with the device.
5.3
License Release
NOTE
In order to use the full scope of the purchased licenses you need to connect the device to the HGS
server prior to the first start-up.
Proceed as follows to connect the device with the HGS server:
22
