mega macs 66
13. Regard the window with infos and instructions.
14. Confirm the window with infos and instructions with
.
Communication to vehicle is being established. Basic settings are made automatically.
The message
Basic setting successfully done.
appears if the basic setting was successful.
9.4.7 Codings
Here you can code components and ECUs. Codings are necessary, if components were replaced or additional functions
in an electronic system must be activated.
9.4.7.1
Performing Manual Coding Procedures
WARNING
The ECU is not coded or is incorrectly coded
Risk of death or serious injury as a result of the ECU not working or working incorrectly
Material damage of the vehicle or the ambient area
Regard the following when performing coding procedures:
•
Some working procedures require a specific training, e.g., working on the airbag.
•
Regard the window with infos and instructions.
Proceed as follows to perform manual coding:
1. Perform steps 1 to 11 as described in the section
CAUTION
Pulling off of the OBD plug when operating the clutch
Risk of injury or material damage
Proceed as follows before starting:
1. Apply the parking brake.
2. No gear is engaged.
3. Regard the window with infos and instructions.
2. Select
Codings
under
> Function
.
NOTE
The selection of the following possibilities depends on the selected manufacturer and vehicle
type:
•
Functions
•
Assemblies
•
Systems
•
Data
3. Select the requested assembly.
4. Select the requested system.
5. Observe the info window.
6. Call up the
>Information<
tab.
7. Follow the instructions on the screen.
92
