mega macs 66
8. Start the manual coding with
.
9. Regard the window with infos and instructions.
10. Follow the instructions on the screen.
11. Confirm the coding performed with
.
9.4.7.2
Performing Automatic Coding Procedures
WARNING
The ECU is not coded or is incorrectly coded
Risk of death or serious injury as a result of the ECU not working or working incorrectly
Material damage of the vehicle or the ambient area
Regard the following when performing coding procedures:
•
Some working procedures require a specific training, e.g., working on the airbag.
•
Regard the window with infos and instructions.
Proceed as follows to perform an automatic coding procedure:
1. Perform steps 1 to 11 as described in the section
CAUTION
Pulling off of the OBD plug when operating the clutch
Risk of injury or material damage
Proceed as follows before starting:
1. Apply the parking brake.
2. No gear is engaged.
3. Regard the window with infos and instructions.
2. Select
Codings
under
> Function
.
NOTE
The selection of the following possibilities depends on the selected manufacturer and vehicle
type:
•
Functions
•
Assemblies
•
Systems
•
Data
3. Select the requested system.
4. Observe the info window.
5. Call up the
>Information<
tab.
6. Follow the instructions on the screen.
7. Start automatic coding with
.
Communication to vehicle is being established.
8. Regard the window with infos and instructions.
9. Confirm the window with infos and instructions with
.
Coding is performed automatically.
The message
Coding successfully done.
appears if the coding process was successful.
93
