3.6 Electrical connection
In order to ensure the safe and trouble-free operation of the device, the following instructions must be
observed for the electrical connection:
• Before connecting the device, compare the connection data (voltage and frequency) on the rating
plate with those of your electrical network. This data must agree in order that no damages occur in
the device If in doubt, ask your qualified electrician.
• The electrical outlet must be protected by a 16A safety cut-out switch.
• The connection between the device and the electrical network may employ a 3 meter long (max.)
extension cable with a cross-section of 1.5 mm². The use of multiple plugs or gangs is prohibited
because of the danger of fire that is involved with this.
• Make sure that the power cable is undamaged and has not been installed under the ice maker or
over hot or sharp surfaces.
• The electrical safety of the device is only guaranteed if the device is connected to a properly
installed protective conductor system. Operations using an electrical outlet without a protective
conductor are prohibited. If in doubt, have the house installation checked over by a qualified
electrician. The manufacturer cannot be made responsible for damages that are caused by a
missing or damaged protective conductor.
4 Function
In this chapter, you‘ll find important information on the function of the device.
4.1 Overview:
1 Lid
2 Whisk holder
3 Jug
4 Power button
5 Power Base
Summary of Contents for GZ-002
Page 24: ......
