17
If you wish to operate the unit without the need to empty the water
tank, please:
• Remove the drain knob and
rubber plug and retain for
future use.
• Connect the drain tube
supplied to the water outlet
as shown and locate the other
end into a drain.
• The drain tube may be
extended by adding an
extension tube and using a
suitable connector.
Please note
1. The drain must be at or below
the outlet level.
2. Flashing ‘full water’ indicator
will not function in this mode
of drainage.
3. If you want to extend the water
tube, you can connect it with
another tube (OD: 18 mm)
GUDLQDJH WXEH
Rubber plug
drainage tube
Originally supplied tube
Extension tube (OD: 18 mm)
drain knob
Fig. 14
Fig. 15
Fig. 16
