CLEANING
• Always unplug cord of power base before cleaning.
• Make sure kettle is cold.
• Clean the exterior surface with a clean, damp, soft cloth.
• Never use abrasive cleaners or scouring agents.
• Rinse out kettle and wipe dry with a soft, lint-free cloth.
Attention:
• Over time the stainless steel cover of the heating element inside
the bottom of the kettle may change color slightly. This is caused
by the intense heat of the heating element.
• If your water has a high iron content brownish stains may appear
on the stainless steel element (this is also known as „boiler
scale“). These stains can be wiped away with a cloth and a mild
abrasive. Rinse kettle thoroughly with fresh water.
DECALCIFICATION
Hard water can leave calcium spots inside the kettle. Use a
commercial descaling agent and follow the instructions that come
with the agent.
NOTE:
Make sure kettle is cold.
Summary of Contents for GZ-201
Page 31: ......
