6
DANGER!
1. Do not connect the appliance to the mains if the appliance itself or the
power cord or the plug are visibly damaged.
2. Never try to repair the appliance yourself. If the appliance does
not operate properly, please contact the shop you purchased the
appliance at. Original spare parts should be used only.
3. When the power cord is damaged, it must be replaced by the
manufacturer or an authorized customer service or a qualified
professional only.
WARNING!
To reduce the risk of burns, electrocution, fire or injury to persons:
1. This appliance is equipped with the environmental-friendly
refrigerant R600a. The refrigerant R600a is inflammable . The
components of the cooling circuit must neither be damaged during
transport nor use.
2. If any part of the cooling circuit is damaged, the appliance must not
stand near a fire, naked light or spark-generating devices.
Contact the customer service or the shop you purchased the
appliance at immediately.
3. If gas is set free at the installation site:
a) Open all windows.
b) Do not unplug the appliance and do not use the control panel or
thermostat.
c) Do not touch the appliance until all the gas has gone.
d) Otherwise sparks can be generated which will ignite the gas.
4. Keep all components of the appliance away from fire and other
sources of ignition when you dispose of or decommission the
appliance.
5. Do not install the appliance near of volatile or combustible materials
(e.g. gas, fuel, alcohol, paints) and in rooms which may have poor air
circulation (e.g. garage).